T-7000 (1-12kW)

Call For Pricing

The presence of a functional electricity grid is not always as obvious as it would seem to be. An insufficient infrastructure is often the cause for an unreliable grid. The situation becomes even more difficult when there is no grid at all and yet a need for a reliable electricity supply is always there. A local and properly functioning system is the only answer at this point. The i-power T-7000 is that answer, it is a full digitised powerful single phase-in/single phase-out all-in-one charger/inverter system. It consists of a dual AC prioritised mode and an inverter prioritised mode, accompanied by a large charging current charger. Packed inside the T-7000 Interactive inverter-charger are three main core elements: a powerful low frequency pure sinewave inverter, a high power battery charger, and a fast action automatic AC changeover switch. By having all three units combined into the one product saves on space, weight, and reduces installation complexities. All features are seamlessly integrated to give fully automatic operation without any manual switching required.

Product highlights

  • Powerful sinewave inverter, battery charger and auto transfer switch in one unit.
  • Compact design with high overload handling.
  • 9 output power factor.
  • Selectable low battery voltage trip.
  • Selectable sensing cycle to reduce power consumption.
  • 3-step intelligent battery charging.
  • 8 pre-set battery type selector.
  • Powerful charge rate up to 70Amp.
  • PFC (Power Factor Correction) for charger.
  • Extra protection for loads under generator mode.
  • Selectable AC voltage range.
  • 8ms average transfer time, guaranteeing power continuity.
  • Ability to switch the unit on/off manually.
  • Ability to select/deselect power saver mode.
  • 17 alarms/warnings.
  • LCD display with LED indicators.
  • Optional RS232 communication port.

Applications

  • Network
  • Security
  • Banking
  • Retail
  • Education
  • E-commerce
Capacity (W) 1kW, 2kW, 3kW, 4kW, 5kW, 6kW, 8kW, 10kW, 12kW
Input Specification
Input Voltage 100/120/220/230/240Vac
Input Voltage Range 192-243Vac/164-243Vac For 1-6kW, 154-273Vac For 8-12kW
Input Frequency Range 50Hz/60Hz (Auto-Tracking)
Phase & Waveform Single Phase & Sinewave
Output Specification
Output Voltage 100Vac/120Vac/220Vac/230Vac/240Vac Single Phase
(Sync To Input On AC Mode)
Power Factor 0.9
Overall Efficiency Line Mode >95%
  BAT Mode >85%
  Power Saver :Available When The Load Is Less Than 50watts
Output Frequency 50/60Hz (Auto-Tracking)
Output Waveform Pure Sine Wave
Crest Ratio 3:1
Battery Specification
Battery Voltage 1-2kW: 12Vdc/24Vdc, 3-4kW: 12Vdc/24Vdc/48Vdc, 5-6kW: 24Vdc/48Vdc, 8-12kW: 48Vdc
Max Charging Current 1-8kW: 20-75A, 10kW: 20-85A, 12kW: 20-100A
OTHERS
Noise (In 2 Meters) DB <60
Working Temperature( ⁰C) 0-40
Protections Overload, Over Temp, Over Voltage
LED Display Line Mode, Inverter Mode, Charging Mode, Fully Charged, Over Heat Shutdown, Overloaded Shutdown, Saving Mode
Large LCD Charging Mode, Inverter Mode, Alarm
Switch Selector Saving Mode Is On/Off When Push The Switch Forwards/Backwards,
Keeping Horizontal Is Turning Inverter Off
Audible Alarm Alarm Is Triggered When The Heat Sink Temperature Is Over 105℃,
With Shutdown After 30 Seconds
Communication Port RJ11/RS232 (Optional)
Physical Characteristics
Size (RM D*W*H) Mm 1-3kW: 218*179*442, 4-6kW: 218*179*598, 8kW: 549*450*201, 10-12kW: 584*450*201
Net Weight (Kg) 1kW:14, 2kW:19, 3kW:23, 4kW:35, 5kW:44, 6kw:44, 8kW:56, 10kW:64, 12kW:68
Note: Product image and technical specifications are for reference and could be change without any notice.